7 x 65 W 7.1-Channel A/V Receiver with HDMI™ 1.4a Repeater, Audio/Video Processing and Upscaling to 1080p, 3DTV

The Harman Kardon® AVR 2600 is the most affordable Harman Kardon receiver to feature both Dolby® TrueHD and DTS-HD Master Audio™ decoding on the audio side, and Faroudja DCDi Cinema® video processing to 1080p on the video side. But there's plenty more to recommend the AVR 2600, including three HDMI™ inputs, connections for external amplifiers, EzSet/EQ™ technology to fine-tune your system to the acoustics of your room, and an RS-232 port for future firmware upgrades. Perhaps the highest recommendation of all? As do all Harman Kardon A/V receivers, the AVR 2600 features a high-current, ultrawide-bandwidth design for maximum fidelity.

Audio

• Stereo Mode
• Continuous Average Power (FTC) per Channel : 65 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohms
• Seven-Channel Surround Modes, Power per Individual Channel,
• All Channels Operating at Full Power :
• Front L & R Channels : 65 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
• Center Channel : 65 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
• Surround Channels (L & R Side, L & R Back) : 65 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
• Input Sensitivity/Impedance, Linear (High-Level) : 200mV/47k ohms
• Signal-to-Noise Ratio (IHF-A) : 100dB
• Surround System Adjacent Channel Separation :
• Dolby® Pro Logic® I and II : 40dB
• Dolby® Digital : 55dB
• DTS® : 55dB
• Frequency Response at 1W (+0dB, –3dB) : 10Hz – 130kHz
• High Instantaneous Current Capability (HCC) : ±35 Amps
• Transient Intermodulation Distortion (TIM) : Unmeasurable
• Slew Rate : 40V/µsec

FM Tuner

• Frequency Range : 87.5MHz – 108.0MHz
• Usable Sensitivity : IHF 1.3µV/13.2dBf
• Signal-to-Noise Ratio : Mono/Stereo 70/68dB
• Distortion : Mono/Stereo 0.2/0.3%
• Stereo Separation : 40dB @ 1kHz
• Selectivity : ±400kHz, 70dB
• Image Rejection : 80dB
• IF Rejection : 90dB

AM Tuner

• Frequency Range : 520kHz – 1720kHz
• Signal-to-Noise Ratio : 45dB
• Usable Sensitivity : Loop 500µV
• Distortion : 1kHz, 50% Mod 0.8%
• Selectivity : ±10kHz, 30dB

Video

• Television Format : NTSC
• Input Level/Impedance : 1Vp-p/75 ohms
• Output Level/Impedance : 1Vp-p/75 ohms
• Video Frequency Response :
• Composite and S-Video : 10Hz – 8MHz (–3dB)
• Component Video : 10Hz – 100MHz (–3dB)
• HDMI™ : Version 1.4a with 10-bit Deep Color

General

• Power Requirement : AC 120V/60Hz
• Power Consumption : 65W idle, 540W maximum (7 channels driven)

Unit Dimensions :

• Width : 17-5/16" (440mm)
• Height : 6-1/2" (165mm)
• Depth : 15" (382mm)
• Carton Dimensions (W x H x D) : 21-7/8" x 10-1/2" x 18-5/16"
• (555mm x 266mm x 465mm)
• Unit Weight : 27.1 lb (12.3kg)
• Shipping Weight (System, Accessories, Packing) : 32.8 lb (14.9kg)

Two-Year Manufacturer's Warranty