Music at its best has you riding the crest of a wave, but thanks to generic USB cables, most music is drowned in an ocean of electronic noise.

The Mercury3.0 cancels this out, restores natural flow and gets your audio back on board.

Quadtastic.

Wiring in generic USB cables is compacted, which causes distortion.

The Mercury3.0 separates the audio signal from the power with quadruple shielding to eliminate interference and jitter.

Ride the sound wave.

Generic USB cables make listening a total wipe-out. The Mercury3.0 clears the waters and makes you want to ride the audio sound wave again and again.

And for the ultimate audio experience, couple it with the iGalvanic3.0 or micro USB3.0.

The tech spec.

The Mercury3.0 has:

• USB3.0 For supersonic audio speed
• RF3 Custom Noise Silencers For effective silencing

These add texture to music and create a faster, smoother audio experience.

Super speed. The USB3.0's ultra-speed bandwidth of 5.0Gbps offers an incredibly wide bandwidth, ten times that of USB2.0's 480Mbps.

As with the original Gemini cable, in the Gemini3.0 the power cable is heavier gauge and audio has more cores.

Furthermore, signal and ground have their own respective geometry for optimal conductivity.

With generic mass-produced USB cables, the data and power cables are normally packed together. This means that they do not conduct as well as they should and they are not sufficiently shielded from each other. This has a negative impact on USB signal integrity and degrades sound quality.

Our quadruple shielding fully separates and protects the delicate USB data signal from the power. This protects the cable from RFI and EMI noise to provide the cleanest transfer medium possible.

Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link. Noise radiates out. Durability is compromised as few manufacturers make their own final connectors.

Our FINAL USB connectors provide impeccable end-to-end RF shielding, being machined entirely from solid, aircraft-grade aluminium.

Plus gold-plated connections make for years of steadfast service.

Most standard USB cables do not address RF issues and are fitted with filters that work over too narrow a range and are only fitted at the ends of the cables, leaving the length of the cable to act as an antennae.

iFi's three custom-made metal oxide ceramic filters have a different effective range to broaden the range over which RF noise is silenced. The middle silencer is adjustable and can be moved along the whole length of the cable. This then "detunes" the antennae formed by the cable. The other two silencers should be kept as close to each respective end as possible.

Specifications:

USB(Data)/USB(Power):

• Construction: Minimu inductance parallel construction
• Conductors: 24 and 28AWG
• Conductor material: Heavy OFHC continuous cast copper silver matrix
• Insulation: HD Polyethylene
• Shielding: Quadruple-shields
• Impedance: 90 Ohms (1% tolerance)
• AC spark insulation : 1500V
• Connectors: iFi 'FINAL' USB connectors
• Insulation resistance: 100Mohm
• Tensile strength: 1500PSI
• Lengths/Weights: 1.0m/115g (0.25 lbs)