Enterprise AV over IP Solutions
Key Digital's Enterprise AV over IP Encoders and Decoders create expandable HDMI over IP systems that can be scaled to fit any commercial installation.
Features:
- Connectivity: Can be connected through a network IP switch or point-to-point
- H.264 Compression: Ideal standard for large video distribution applications
- Low-bandwidth System: Supports managed 100BaseT or Gigabit network switches
- Custom System: Add Tx and Rx extenders to an existing system to expand HDMI over IP up to 1024 Tx units and unlimited amount of Rx units
- Power Over Ethernet: Carry power to Tx and Rx units with a Power Over Ethernet enabled Smart Managed Switch
- HDMI Pass-through: Tx unit support HDMI Pass-through to receive video or extract audio on the transmit side
- Alternative Extension Methods: Enabled by low-bandwidth data streaming technology
- Wifi Extender: Up to 100 ft.
- IP over Coaxial: Up to 1000 ft.
- Resolution Support: Supports up to 1080p@60 (2.25Gbps) and compatible with DVI1.0/HDMI/HDCP1.x
- Audio Format: Supports 2ch PCM at 44.1/48kHz
- Data Stream Bandwidth: < 15Mbps.
- Signal Extension: Up to 400 ft. @ 1080p@60 (2.25Gbps) using CAT5e/6 UTP/ STP cable
- Web Control Interface: Reduces installation time and provides basic video setup.
- Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake
- EDID: EDID libraries readily available to provide the best setup per source
- Deep Color Support: Up to 12 bits/color
- TMDS re-clocking: Support for long HDMI runs using Key Digital® HDMI cables
- Licensing: Fully licensed and compatible with all HDMI and HDCP technologies up to HDMI 1.4 and HDCP 1.4
- Control System Support: Key Digital® app ready. Key Digital Management Software ™ Pro (KDMS ™ Pro) ready, Compass Control® Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.
- Source/Display Control: Integrate with KD-CX800 to add 3 IR, RS-232 or Trigger ports
- Key Digital® App Ready: Can be controlled over TCP/IP via Key Digital® App
- Control App Stabilization: One KD-CX800 or KD-MC1000 recommended to act as a gateway and increase reliability from KD-App control
Specifications:
Technical:
- Tx Input: 1 HDMI Connector, Type A, 19 Pin Female
- Tx Output: 1 HDMI Connector, Type A, 19 Pin Female; 1 CAT5e/6 on RJ45
- Rx Input: 1 CAT5e/6 on RJ45
- Tx Output: 1 HDMI Connector, Type A, 19 Pin Female
- TMDS Bandwidth: 2.25 Gb/s per Channel
- Deep Color Support: Supports digital video formats in Deep Color Mode up to 12 bits/color
- Link: Single Link
- DDC Signal (Data): Input DDC signal - 5 Volts p-p (TTL)
- HDMI Video/Audio Signal: 1.2 Volts p-p
- DDC Communication: EDID and HDCP buffering between source and display
- Power: KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head, screw-in connector. KD-IP1080POE POE power consumption ≤ 6 watts per unit
General:
- Regulation: CE, RoHS, WEEE
- Enclosure: Black Metal
- Rack Mount: 3U with KD-RK120PLT bracket
- Product (Each): 4.74" x 3.11" x 1.16"
- Weight: 0.6 lbs
What's in the box:
- Power Supply (qty 1) 5V/2A, 10W, wall type, model KDPS5V2ASC
- Shelf-mount: L brackets
- Operating Instructions