SWAT 2.4 is a wireless audio transceiver that allows you to play audio material from your audio source player to almost any speaker wirelessly. Hard wiring your speakers to your sound source is costly and time consuming. SWAT 2.4 makes install a snap but does not compromise sound quality for convenience. It is extremely versatile and perfect for apartments or outdoor settings. It even has microphone capability so you can transmit voice as well.
 
SWAT 2.4 consists of a Transmitter (a unit that connects to the source) and a Receiver (a unit that connects to the amplifier or powered speaker). The SWAT 2.4 Transmitter connects to a stereo, MP3 player, computer, or any other device that can play audio through a 3.5mm stereo jack or RCA output. The Receiver is then connected to an amplifier or a powered speaker through an RCA input. Multiple Receivers can connect wirelessly to one Transmitter if you want the music to play in different areas or on multiple systems. Extra Receivers can be purchased separately.

Includes:

• 1 Transmitter 
  
• 1 Receiver
• 2 RCA to 3.5mm jack cords
• 1 3.5mm jack to 3.5mm jack cord
• 2 110/220 Power Supplies 

Features

• Frequency: 2400-2528MHz
• Channels: 20
• Two types of inputs supporting microphones and stereo
• Digital transmission
• Additional 20dB selection can be available with microphone input (for the high-sensitivity microphone, surveillance, monitoring applications)
• Highest sampling ratios: 64k @ 16 bit x 2, frequency response 20kHz; HDCD sound effect
• Lowest latency (<0.5ms), and good quality of surround
• Low power consumption for a wide range of input voltage supporting
• Audio muting function when receiving weak signal or no signal
• Auto channel scanning function 

One-Year Manufacturer's Warranty