Mission LX-5 Floorstanding

The LX-5 is a three-way design. The midrange and mid/bass drivers use cones manufactured from an advanced fibre formulation, impregnated to reduce hygroscopy as well as being very stiff for their mass, with excellent self-damping. With the use of a powerful ferrite magnet, the magnetic field is directed precisely within the area of voice coil excursion, enabling an ultra-linear performance that minimises colouration.

While high performance mid/bass and treble units are the foundation of a great sounding speaker, if the cabinet is not properly reinforced it can be an unruly source of unwanted noise. To prevent this, extensive research and development was carried out by the designers of Mission to ensure internal cabinet robustness, eliminating any unwanted cabinet resonances and vibrations. Using a combination of CAD analysis, a lot of experimentation and extensive listening tests, the cabinet within each speaker has been braced at key points which means that the full frequency range is clear and detailed.

Mission LXC Centre Channel

LX Series speakers are smart, practical and affordable, sporting a sharp, classic but modern look in keeping with Mission's customary design focus. Above all, they communicate music with engaging energy and detail, bringing performances to life with all the vibrancy and finesse one expects of Mission speakers. The LX-C is a 2-way centre speaker, combining the 25mm Mission tweeter and two mid/bass drivers.

While high performance mid/bass and treble units are the foundation of a great sounding speaker, if the cabinet is not properly reinforced it can be an unruly source of unwanted noise. To prevent this, extensive research and development was carried out by the designers of Mission to ensure internal cabinet robustness, eliminating any unwanted cabinet resonances and vibrations. Using a combination of CAD analysis, a lot of experimentation and extensive listening tests, the cabinet within each speaker has been braced at key points which means that the full frequency range is clear and detailed.

Low End Clarity

The MS Series can radically improve any home cinema or stereo system from flat, mundane audio to a bass-rich cinematic sound.

Mission MS200 Sub

The MS-200 subwoofer with built with 150mm & 200mm long throw drivers, variable crossovers in sealed-box cabinets, the new additions are a perfect companion to the new, affordable VX Series.

Mission LX-5

• Floorstanding
• Bass reflex enclosure
• 3-way speakers
• 2 x 165mm advanced bass driver
• 130mm advanced fibre midrange driver
• 25mm microfibre dome tweeter
• 90dB sensitivity (1w @ 1m)
• 15-200W recommended amp power
• 6 Ohms nominal impedance
• 3 Ohms minimum impedance
• 38Hz-30kHz frequency response
• 580Hz/2.8kHz crossover frequency
• 1020 x 214 x 335mm
• 21kg

Mission LXC

• Centre channel
• Sealed box enclosure
• 2-way speaker
• 2 x 100mm advanced fibre bass driver
• 25mm microfibre dome tweeter
• 87.5db sensitivity (1w @ 1m)
• 20-100w recommended amp power
• 100w peak power output
• 6 Ohms nominal impedance
• 5 Ohms minimum impedance
• 80Hz - 30kHz frequency response
• 2.1KHz crossover frequency
• 160 x 400 x 210mm
• 5.8 kg

Mission MS200SUB

• Enclosure Type Sealed Box
• Bass Driver 10 inch long throw
• Amplifier Power
  • 120 Watts (Continuous)
  • 250 Watts (Peak)
• Input Sensitivity 200mV
  
• Frequency Response 35Hz - 150Hz
• SPL (1W @ 1m) 110dB
  
• Inputs
  • Stereo RCA (Left + Right)
  • LFE
• Dimensions (H x W x D) in mm 393 x 333 x 372
  
• Weight 15.5kg
  
• Colour : Black