Features:

• HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
• 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
• Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx.
• Low Profile: Super slim chassis design
• Signal Extension: For resolution and cable quality
• 4K/UHD: Up to 230 ft. (70m) using CAT5e/6 Up to 328 ft. (100m) using CAT6A STP / CAT7
• 1080p: Up to 328 ft. (100m) maximum
• Long Range Mode: Extends 1080p signals up to 500 ft. (152m) using CAT5e/6 (UHD/4K not supported)
• 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
• HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
• HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
• Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
• EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx
• Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input and output devices
• Full Buffer System ™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control
• 3D Pass-thru: Support for 3D enabled by default EDID handshake library or EDID copy from 3D supported display
• IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
• Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
• RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
• Lossless compressed digital audio: Support for Dolby® TrueHD,Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio ™
• CEC Pass-thru: For inter-device control between input and output HDMI channel

Specifications:

Technical:

• Inputs Tx (Each): 1 HDMI, 1 IR, 1 RS-232
• Outputs Tx (Each): 1 HDBaseT, 1 IR, 1 RS-232
• Inputs Rx (Each): 1 HDBaseT, 1 IR, 1 RS-232
• Outputs Rx (Each): 1 HDMI, 1 IR, 1 RS-232
• Bandwidth: TMDS bandwidth 18Gbps
• Deep Color Support: Digital video formats in Deep Color Mode up to 12 bits per color
• DDC Communication: EDID and HDCP Bi-directional buffering from Display to Source
• HDMI Connector: Type A, 19 Pin Female
• RJ45 Connector: Shielded Link Connector, HDBaseT
• IR Connector: 4-pin Phoenix
• RS-232 Connector: 3-pin Phoenix
• Power: (1) 48V/0.42A, 20W DC Power Supply (Screw-In Type). 100-240VAC, 50-60Hz. Interchangeable transformer plug with screw-in connector. Model KDPS4842ASC

General:

• Regulation: CE, RoHS, WEEE, EAC
• Enclosure: Black Metal
• Product (Each): 4.1" x 2.8" x 0.875"
• Weight: 0.75 lbs

What's in the box:

• Power Supply (qty 1) 48V/0.41A, 20W, desktop type, model KDSP20W48VC
• Mounting Brackets (qty 4)
• IR Emitter (qty 1)
• IR Sensor (qty 1)
• 3-pin Phoenix Connector (qty 1)
• 4-pin Phoenix Connector (qty 1)