We are very happy to bring back this beautiful nostalgic turntable with a lot of Pro-Ject history in its veins. This "Final Edition" is limited to 400 pieces and is sold with a personalized owners certificate.

This "Final Edition" series aims to pay homage to our past and allow you to own a piece of Pro-Ject history by bringing back some of the turntables we have made over the last 32 years.

The Original Pro-Ject 6.9 Perspective

The Pro-Ject 1 and 2 were big milestones for minimalistic design and sound quality, but designed for the entry HiFi market. One of our most important product was our first high-end turntable in the 90's: The Pro-Ject 6.9 and the Pro-Ject 6.9 Perspective. With this turntable we changed our gameplan and followed a new philosophy: The sub chassis design.

The construction is quite simple yet effective: The tonearm and the platter are mounted on a sub chassis which is isolated with from the main chassis with springs. Therefore, vibrations cannot travel to the needle and influence the audio transcription. Also, the motor is isolated from the cartridge and vibration can not influence the pickup process. The result is a more open and rhythmic sound.

Features:

Sub Chassis

Spring loaded

The sub chassis is decoupled from the plinth with 3 adjustable springs to stop vibrations from traveling to the needle and influence the audio transcription.

Spike Feet

Made of aluminium

The turntable rests on three full aluminium spikes. Spikes are designed to reduce the contact area to minimize the vibration interference.

9" Tonearm

One-piece carbon

The Perspective features the proven 9'' one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.

2M Bronze

Nude fine line diamond

The slim profile of the Fine Line stylus will track even the highest frequency information. Additionally, its larger footprint ensures reduced distortion and record wear.

Specifications:

• Speed: 33, 45 (electronic speed change)
• Drive principle: belt drive with electronic speed control
• Platter: 300mm die cast aluminium platter with TPE
• Platter bearing: high precision stainless steel axle in bronze bushing
• Wow & flutter: 33: +/-0,12%; 45: +/-0,11%
• Speed drift: 33: +/-0,25%; 45: +/-0,23%
• Signal to noise: 70dB
• Tonearm: 9" one-piece carbon tonearm
• Effective arm length: 230 mm
• Overhang: 18mm
• Included accessories: 15V DC / 0,8A power supply, dust cover, 7'' single adapter
• Power consumption: 5W / 0,3W standby
• Dimensions: 462 x 175 x 360 mm (WxHxD)
• Weight: 8 kg