Features:

• Presentation Switcher Kit: Includes KD-UPS52U and KD-X100MRx. Add KD-X4x1WUTx wall plate HDBaseT Tx for plug-in on walls, floor and table boxes
• Presentation Switching: 1 HDBaseT, 2 HDMI, 1 Display Port, 1 USB-C source selection by push button, IP, RS-232, IR, auto switching, or trigger control
• Soft-Codec Enabling System: USB Host + Device ports on KD-UPS52U, KDX4x1WUTx wall plate transmit and KD-100MRx (included) create connectivity hub for professional USB cameras and microphones, audio DSP, keyboard, mouse, or touchscreen display with connected computer
• PTZ USB Camera Integration: Integrates natively with KD-CAMUSB for full PTZ control via KD-App and more
• Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
• Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
• CEC Manager ™: Power, volume, and muting controls of the connected display/ projector without any additional control wiring. Selection of desired CEC command recipient
• Audio De-embedding: Audio of the selected source is de-embedded at the unit's analog L/R balanced/unbalanced and PCM digital audio connectors
• ARC / eARC: Audio may be returned from the connected display or Rx (KD-X100MRx) unit and output on the external analog & digital outputs
• KD-AMP220 Control Mode: Command forward to KD-AMP220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement
• HDCP Licensing: Fully licensed and compatible with HDCP 2.2
• HDR10: More life-like images through a greater range of luminance levels
• Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-UPS52U
• Installation: Half-rack width with rack mounting ears included
• Signal Extension: For resolution and cable quality
• 4K/UHD (18G): Up to 100m / 328ft
• 1080p: Up to 150m / 492ft
• Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
• Full Buffer System ™: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, EDID Control handshake, and Hot Plug Detection Voltage
• EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device
• RS-232: Bi-Directional control to/from Tx and Rx/Presentation Switch unit
• Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit
• Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio ™
• Control System Support: Fully controllable by all TCP/IP and RS-232 supported control systems via open API: Compass
Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
• KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager

Specifications:

Technical:

• AV Inputs: 2x HDMI, 1x Display Port, 1x USB-C,
• AV Outputs: 1x HDBaseT RJ45, 1x HDMI, 1x Analog Audio on 6-pin terminal block, 1x Digital Audio on PCM RCA
• DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)
• HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
• Display Port Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
• USB-C Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
• RJ45 Connectors: Shielded Link Connector, 2x HDBaseT, 1x LAN
• Unit Control: TCP/IP on RJ45, Bi-directional RS-232, Serial IR, IR sensor, USB Micro
• RS-232 Connector: 1x 3-pin terminal for unit control, 2x 3-pin terminal for pass-thru to/from HDBaseT Input and HDBaseT output
• IR Connectors: 1x IR Sensor, 1x 2-pin terminal for unit control, 1x 2-pin terminal for IR pass-thru to HDBaseT Input, 1x 3.5mm mono for IR input pass-thru to HDBaseT Output, 1x 3.5mm mono for IR output pass-thru from HDBaseT Output
• RS-232 Connector: 3-pin phoenix terminal

General:

• Regulation: CE, RoHS, WEEE, EAC
• Enclosure: Black metal
• Product Dimensions: 8.27 x 7.20 x 1.75" (210 x 183 x 44.4 mm)
• Product Weight: Weight: 4.0 lbs / 1.81 kg

What's in the box:

• Power Supply (qty 1) 48V/1.66A, 80W, desktop type, model KD-PS80W48VC
• Operation User Manual (qty1)
• Remote Control: KD-RMPS (qty 1) includes battery
• Rack Ear Mount of UPS52U (qty 2)
• Rack Ear Mount Screw of UPS52U (qty 4)
• Half Rack Ear Mount of UPS52U (qty 1)
• Table Top Ear Mount of UPS 52U (qty 2)
• Table Top Ear Mount Screw of UPS52U (qty 4)
• RX Extended (KD-X100MRX) (qty 1)
• Wall Ear Mount of X100MRX (qty 2)
• Wall Ear Mount Screw of X100MRX (qty 4)
• 6 Pos. Blue Color Terminal Block Plug (F73-5-30600060) (qty 1)
• 6 Pos. Green Color Terminal Block Plug (F73-5-30600050) (qty 1)
• 3 Pos. Green Color Terminal Block Plug (F73-5-30300050) (qty 3)
• 6FT Micro USB To USB A (USB 2.0) Data Cable (qty 1)
• 6FT USB A to USB B (USB 2.0) Data Cable (qty 1)
• IR Emitter (3.5mm mono type) (qty 1) Key Digital
• IR Sensor (3.5mm stereo type) (qty 1) Key Digital