Klipsch La Scala II 15" 3-Way Fully Horn-Loaded Floorstanding Speaker (Each)

The Klipsch La Scala II is a three-way fully horn-loaded loudspeaker originally designed for professional use and equally suited to high-performance home audio systems. Its extremely high 105 dB sensitivity allows it to produce substantial acoustic output from even modest amplifier power while delivering the clarity, dynamics and efficiency associated with Klipsch Heritage loudspeakers.

The La Scala II combines a 15" fiber-composite woofer with a folded horn, a 2" phenolic-diaphragm midrange compression driver coupled to a high-efficiency exponential horn, and a 1" lightweight polyimide-diaphragm compression tweeter mated to a 90° x 40° Tractrix horn. The enclosure is made in Hope, Arkansas using domestic and imported components.

Features:

• 3-Way Fully Horn-Loaded Design - The tweeter, midrange and 15" woofer sections all use horn loading for exceptional efficiency and dynamic output.
• 105 dB Sensitivity - Extremely high sensitivity enables substantial output using relatively modest amplifier power.
• Neodymium Tweeter - Uses a 1" (2.54 cm) lightweight polyimide diaphragm and copper-clad aluminum voice coil with a high-strength neodymium magnet structure.
• 90° x 40° Tractrix Horn - The high-frequency compression driver is coupled to a Tractrix horn for high efficiency, dynamic range and controlled dispersion.
• Horn-Loaded Midrange - A 2" (5.08 cm) phenolic-diaphragm compression driver is mated to a high-efficiency exponential horn.
• 15" Horn-Loaded Woofer - K-33-E 15" (38.1 cm) fiber-composite cone woofer operates with a folded horn for efficient low-frequency reproduction.
• Bi-Wire / Bi-Amp Capability - Premium aluminum input panel and binding posts support conventional wiring, bi-wiring and bi-amping.
• Book-Matched Wood Veneer - Heritage Series veneer leaves are precisely arranged to create a mirrored appearance at the splice joints.
• Matched Pairs - Heritage loudspeaker pairs are grain-matched from wood veneer panels originating from the same timber and receive sequential serial numbers.
• Heavy-Duty Construction - Birch plywood and MDF cabinet construction uses high-grade adhesives and fasteners.
• Designed and Made in the USA - The enclosure is made in Hope, Arkansas using domestic and imported components.

Specifications:

Acoustic Performance:

• Speaker Type: 3-Way Fully Horn-Loaded Loudspeaker
• Frequency Response (+/- 4 dB): 51 Hz - 20 kHz
• Sensitivity: 105 dB @ 2.83V / 1m
• Power Handling: 100W Continuous / 400W Peak
• Maximum SPL: 121 dB
• Nominal Impedance: 8 Ohms Compatible
• High-Frequency Crossover: 4500 Hz
• Mid-Frequency Crossover: 450 Hz

Drivers:

• Tweeter: K-771 1" (2.54 cm) Lightweight Polyimide Diaphragm Compression Driver
• High-Frequency Horn: 90° x 40° Tractrix Horn
• Midrange: K-55-X 2" (5.08 cm) Phenolic Diaphragm Compression Driver
• Mid-Frequency Horn: Exponential Horn
• Woofer: K-33-E 15" (38.1 cm) Fiber-Composite Cone Woofer with Folded Horn

Construction & Connections:

• Enclosure Type: Fully Horn-Loaded
• Enclosure Material: Birch Plywood and MDF
• Input Panel: Aluminum
• Connections: Binding Posts
• Bi-Wire: Yes
• Bi-Amp: Yes

Dimensions & Weight:

• Height: 40" (101.6 cm)
• Width: 24.25" (61.59 cm)
• Depth: 25.31" (64.29 cm)
• Weight: 201 lb (91 kg)