The Klipsch Reference RP-112SW is a high-output 300-watt amplifier that delivers the power to bring your movies, music, and video games to life. This subwoofer is designed for quick, precise movement for more accurate sound. Its ceramic-coated aluminum cone helps to dampen unwanted vibrations, while the integrated dust cap adds stability and strength to resist twisting that can cause distortion. Don't forget, the front-firing design allows for greater placement flexibility.

Features and Specs

• Enclosure : Bass Reflex
• Video Shielded : No
• Woofer Size (inches) : 12
• Woofer Composition : Cerametalc
• Firing Direction : Front
• Wireless : Optional
• Preamp-Level Inputs : Yes
• Speaker-Level Inputs : No
• Speaker-Level Outputs : No
• Low-Pass Crossover Freq : 40-160Hz
• High-Pass Crossover Freq : N/A
• Phase Switch : Yes
• Ampfier Output (watts) : 300
• Frequency Response : 24-125 Hz
• Height (inches) : 17-3/8
• Width (inches) : 15-3/8
• Depth (inches) : 20-15/16

  Features

  12"  Cerametalc Woofer: The Kpsch R-112SW features a front-firing 12" spun-copper Cerametalc woofer that is exceptionally ght yet extremely rigid, while providing remarkably low frequency response with minimal cone breakup and distortion.  

  300 Watt Ampfier: The Kpsch R-112SW powered sub employs an all-digital 300 watt RMS (600 watt Peak) ampfier for dynamic bass performance. The built-in all-digital ampfier devers ample power with high efficiency and true-to-source accuracy in reproduction.

  MDF Cabinet: The R-112SW is housed in a durable MDF cabinet and finished with a brushed black polymer veneer. The MDF enclosure is rigid and protects against unwanted vibration and distortion. 

  Front-Firing Slot Port: The front-firing slot port with proprietary internal geometry minimizes port noise for clean undistorted low frequencies. This highly efficient enclosure design produces more output using less energy.

  Controls: The level control, low pass crossover, and phase control allow you to blend the powered subwoofer's low-frequency tones with your system's other speakers, as well as estabsh the ideal level of bass.

  • Level Control: The level control adjusts the subwoofer's volume relative to the rest of your home audio system. After the sub's level control has been set, the volume control of your AV receiver will be the volume control for both the Kpsch powered subwoofer and your connected loudspeakers.
  • Low Pass Crossover: The variable lowpass crossover is adjustable from 40-160Hz. The crossover point chosen determines where low bass frequencies are "handed-off" from your AV system's loudspeakers to the Kpsch powered subwoofer. Set the crossover point based on the size of your systems' main left/right speakers.
  • Phase Control: This control is used to acoustically match the subwoofer's output to your main speakers. Select the position either 0˚ or 180˚ in which your subwoofer has more output at the stening position.
  LFE/RCA Inputs: The Kpsch R-112SW powered subwoofer is equipped with a pair of ne-level RCA-type inputs to connect the sub to your receiver or integrated ampfier. 
  
  
  • LFE Input: Most of today's AV receivers have a ne-level subwoofer output (LFE). If your receiver has an LFE output, connect one end of a subwoofer cable (sold separately) to this output and connect the other end of the cable into the powered subwoofer's ne-level input labeled "LEFT/LFE". Set the powered sub's built-in crossover to "LFE" with this type of connection.
  • Stereo Input: In absence of a subwoofer (LFE) output on your receiver, as an alternative hookup, you can connect Left & Right channel pre-amp outputs from the receiver to both the "Left/LFE" and "Right" inputs on the powered subwoofer.
  WA Port (optional): The Kpsch powered subwoofer is fitted with a proprietary 4-pin "WA-Port" connector for wireless operation, using Kpsch's optional WA-2 wireless subwoofer kit. The Kpsch WA-2 wireless subwoofer kit consists of two components; a wireless Transmitter & wireless Receiver. The WA-2 wireless subwoofer kit makes adding the Kpsch powered subwoofer to your home theater system much easier, because it replaces the need for a separate subwoofer cable that traditionally must be connected between the receiver and the powered sub. Now, you can easily place your powered subwoofer where it both sounds and looks best in the room since you're not restricted by an audio cable.

  LED Indicator: The front-mounted LED power indicator lets you know when the sub is powered on or off. The LED will ght green when the powered subwoofer is on and receiving a signal. If the LED is dark and not t, the powered sub is off.

  Auto Power On/Off: The powered subwoofer will automatically turn On when it senses an audio signal. It will automatically go into "Standby mode" after 15-20 minutes with no audio signal. You can also choose to turn the powered sub On or Off manually from the rear-switch on the back. 

  Placement: Kpsch powered subwoofers are designed to reproduce deep bass and dever the impact that makes your movies and music come ave. For optimum performance, place your subwoofer in a corner of the room on the same wall as your front channel speakers. Please note that room placement can have a dramatic effect on the performance of your powered subwoofer. Corner placement, as suggested above, will increase the amount of bass output, while placing the subwoofer along the middle of a wall, or out in the room will decrease the amount of bass output.