Features:

• Presentation Switcher Kit: Includes KD-UFS42 and KD-X40MRx.
• Presentation Switching: 2 HDMI, 1 Display Port, and 1 VGA + L/R audio source selection by push button, IP, RS-232, IR, auto switching, or trigger control.
• Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
• Auto-Switching: Automatic selection of newly detected source and switching from newly disconnected source when enabled
• CEC Manager™: Power, volume, and muting controls of the connected display/projector without any additional control wiring. Selection of desired CEC command recipient.
• KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager™
• KDPlug & Present™ Ready: Add KD-CX800 to build a programming-free automation system
• Ease of Integration: Complete configuration using Key Digital Management Software™ Pro
• Audio De-embedding: Audio of the selected source is de-embedded at the unit's analog L/R balanced/unbalanced and PCM digital audio connectors.
• KD-AMP220 Control Mode: Command forward to KD-AMP220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement
• PTZ USB Camera Integration: Add KD-CAMUSB for full PTZ control via KD-App. Use with KD-XUSB2 extender for USB signal extension over CAT5e/6.
• HDCP Licensing: Fully licensed and compatible with HDCP 2.2
• HDR10+ and Dolby Vision: More life-like images through a greater range of luminance levels
• Power Over HDBaseT: Rx unit (included) and wall plate Tx unit powered by KD-UFS42
• Installation: Half-rack width with rack and under-table mounting ears included

Specifications:

Technical:

• AV Inputs: 2x HDMI, 1x Display Port, 1x VGA
• AV Outputs: 1x HDBaseT RJ45, 1x HDMI, 1x Analog Audio on 6-pin terminal block, 1x Digital Audio on PCM RCA
• DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)
• HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
• Display Port Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
• VGA Video Signal: Input Video Signal: 1.2 Volts p-p
• RJ45 Connectors: Shielded Link Connector, 2x HDBaseT, 1x LAN
• Unit Control: TCP/IP on RJ45, Bi-directional RS-232, Serial IR, IR sensor, USB Micro
• RS-232 Connector: 1x 3-pin terminal for unit control, 2x 3-pin terminal for pass-thru to/from HDBaseT Input and HDBaseT output
• IR Connectors: 1x IR Sensor, 1x 2-pin terminal for unit control, 1x 3.5mm mono for IR input pass-thru to HDBaseT Output, 1x 3.5mm mono for IR output pass-thru from
• HDBaseT Output
• RS-232 Connector: 3-pin phoenix terminal

General:

• Regulation: CE, RoHS, WEEE, EAC
• Enclosure: Black metal
• Product Dimensions: 8.27 x 6.42 x 1.75" (210 x 163 x 44.4mm)
• Product Weight: Weight: 3.5 lbs / 1.59kg